Skip to content

Metal Gates

Wrought Iron & Metal Gates in Brentwood

A gate that fits the opening, suits the frontage, and holds its finish without constant upkeep.

  • Made to Measure
  • Powder-Coated Finish
  • Gate Safe Standards
  • Supply & Fit
Ornate black metal automatic gates with brick pillars and a paved driveway leading to a modern house.

What Goes Wrong

Where cheaper or rushed gate jobs fall short

The gate itself is only part of the job, how it is sized, hung, and finished determines whether it lasts.

Off-the-Shelf Sizing

Standard widths rarely match older Brentwood openings, leaving gaps at the posts or a gate that will not close flush.

Measured Fabrication

Opening width, height, and post positions are confirmed before fabrication, so the gate fits the actual entrance.

Bare Steel Finish

Gates supplied without electro-galvanising under the powder coat will rust from the inside out once the surface is scratched.

Galvanised Undercoat

Mild steel is electro-galvanised before powder coating, giving rust resistance that outlasts paint-only finishes.

Hinge Misalignment

Posts set without checking ground clearance cause the gate to drag, bind, or fail to latch within the first season.

Alignment Check on Site

Hinge post positions and ground clearance are confirmed during installation, not corrected with packers after the fact.

DIY Fit Risks

Heavier double-leaf gates need posts set in concrete to the correct depth; an undersized foundation shifts over time and pulls the frame out of square.

Post Foundation Scoping

Foundation depth and concrete specification are assessed for the gate weight and soil type before any post is set.

Gate Types

Single leaf, double leaf, and side gate options

From a narrow side-access gate to a full driveway pair, the right configuration depends on the opening width and how the entrance is used.

Scrollwork Designs

Decorative scroll panels suited to period frontages.

Flat-Bar Styles

Plain vertical bar designs for contemporary homes.

Powder-Coat Colours

Standard and RAL colour options available.

Latch & Lock Fitting

Latch, bolt, and lock hardware fitted as standard.

Steel, Finish & Fit

What wrought iron style metal gates are and how fitting works

Most metal gates sold as wrought iron are mild steel with a decorative finish, and that distinction matters for sizing and longevity.

Request a Survey

Traditional forged wrought iron is rarely used today. What most homeowners want, and what is supplied, is mild steel with electro-galvanising and a powder-coated finish. This gives the same decorative scrollwork appearance with better rust resistance and a consistent colour. Brentwood properties with period frontages suit scrollwork designs; plainer flat-bar styles suit more contemporary homes.

Sizing matters more than style choice. Older and semi-detached homes in the Brentwood area often have irregular opening widths where off-the-shelf gates will not hang correctly. Made-to-measure fabrication means hinge posts, ground clearance, and latch positions are all set to the actual opening, not adjusted on the day with packers and shims.

The supply-and-fit process covers delivery, hinge post installation, gate hanging, latch and lock fitting, and a ground clearance alignment check. Single and double-leaf configurations are both available. The installer confirms the swing path is clear and the gate closes flush before leaving the site.

Why Choose Us

Why arrange your metal gate through us

Local installers who know Brentwood openings, matched to the right gate specification for your entrance.

Gate Safe Specified Installations

Every installation is specified to Gate Safe standards, so the fitting meets a defined safety benchmark, not a loose estimate.

Vetted Local Partners

We connect you with vetted independent local installers who work in the Brentwood area and know its common property types.

Full Scope Quoted Upfront

The quote covers the gate, posts, groundwork, and hardware, no separate charges for latch fitting or alignment work on the day.

Made-to-Measure as Standard

Fabrication is sized to your actual opening measurements, not rounded to the nearest standard panel width.

One Point of Contact

You deal with one contact from survey to sign-off, so nothing falls between the fabricator and the installer on the day.

Photograph
A modern grey video intercom system with a camera and button mounted on a red brick gate pillar next to a black metal gate, with lush green hedges in the background.

How It Works

From first enquiry to a fitted gate

Request a Survey

  1. 01

    Submit Your Details

    Tell us the opening width, height, property type, and preferred style so we can match you with a suitable local installer.

  2. 02

    Survey & Quote

    A local installer visits to confirm measurements, check ground clearance, and provide a fixed quote covering gate and fitting.

  3. 03

    Fabricate, Deliver & Fit

    The gate is fabricated to your confirmed dimensions, delivered, hung on set posts, and aligned before the installer leaves.

Pricing Estimates

Typical Wrought Iron & Metal Gates Prices

JobTypical cost
Standard metal gate installation£1300-£5300
Metal swing gate installation£7000-£7500
Metal sliding gate installation£8000-£8500
These prices are estimates and often vary with the condition, size and scope of each job. Message or call us for a free, no-obligation quote.
See all prices

Common Questions

Questions about metal gate supply & fitting

  • Are these actually wrought iron gates?

    No. What is supplied is mild steel with electro-galvanising and a powder-coated finish. This gives the same decorative appearance as traditional wrought iron but with better rust resistance and a more consistent colour. True forged wrought iron is rarely fabricated today.

  • Do I need a made-to-measure gate or will a standard size fit?

    If the opening is an unusual width, the ground is uneven, or the property has an older frame, made-to-measure is the safer choice. Standard sizes often leave gaps at the posts or sit too high off the ground, which affects both appearance and how well the gate closes.

  • What happens if I delay replacing a damaged or poorly fitting gate?

    A gate that does not close flush or latch properly gives no real security. Rust that starts at a scratch or weld point spreads under the powder coat and weakens the frame over time. Replacing a structurally sound gate is cheaper than replacing one that has corroded through.

  • What should I check before ordering a metal driveway gate?

    Measure the opening width and height, decide whether you need single or double leaves, and check whether existing posts, hinges, and a latch are reusable. Also confirm the ground is level enough for the gate to swing clear without dragging.

  • Can I buy a gate online and fit it myself?

    It is possible for simple, lightweight openings. For heavier or wider gates, the posts need to be set in concrete at the correct depth and the hinges aligned precisely. Getting either wrong means the gate binds, sags, or pulls the post out of plumb within a season.

  • How do I maintain a powder-coated metal gate?

    Wash it down periodically and touch up any chips with a compatible primer and topcoat before rust takes hold beneath the surface. The electro-galvanised layer provides a second line of defence, but surface damage left untreated will eventually reach the steel.

More questions about Wrought Iron & Metal Gates?

Tell Us About Your Entrance

Describe the opening width, height, and style you have in mind and we will arrange a local installer to survey and quote the full job.

Request a Survey