---
title: "Electric Gate Installation in Brentwood | Brentwood Electric Gates"
description: "Request a gate survey in Brentwood. Swing, sliding & cantilever automation to DHF and Gate Safe standards. Free quotes."
canonical: "https://www.brentwoodelectricgates.co.uk/"
lastmod: "2026-11-15T10:00:01.546Z"
---

# Electric Gate Installation in Brentwood

![A large, newly installed wooden gate with arched top panels, set between stone pillars with integrated lighting and an intercom system, leading to a resin-bound aggregate driveway.](https://utmost-ibex-736.convex.cloud/api/storage/36176a9a-583d-4bd0-abac-160c13039f83)

A gate that opens every time, specified to Gate Safe standards and quoted with groundwork and wiring included from the start.

- **Gate Safe Standards**: Every installation specified to Gate Safe before any work is booked.
- **DHF Safety Included**: Safety edges and photocells specified to DHF standards on every job.
- **Full Quote Upfront**: Groundwork and 18th Edition wiring scoped in the quote, not added later.

## Every type of automatic gate installation, scoped for your entrance

Swing, sliding, cantilever, timber, steel, or aluminium, the right type is chosen after a site survey, not before.

- **Electric Gate Installation**: Full supply, fit, and commissioning of an automatic driveway gate, wired to BS 7671.
- **[Automated Sliding Gates](https://www.brentwoodelectricgates.co.uk/services/automated-sliding-gates)**: Sliding gate motor, track, and photocell installation, suitable for gates up to 400 kg.
- **[Automated Swing Gates](https://www.brentwoodelectricgates.co.uk/services/automated-swing-gates)**: Actuator arm, control board, and photocell setup matched to leaf count and swing arc.
- **[Cantilever Gate Systems](https://www.brentwoodelectricgates.co.uk/services/cantilever-gate-systems)**: Trackless sliding gate on counterbalance rollers, no ground rail, no debris blockage.
- **[Aluminium Electric Gates](https://www.brentwoodelectricgates.co.uk/services/aluminium-electric-gates)**: Supply and fit of powder-coated aluminium gates with motor, sensors, and remote handsets.
- **[Wrought Iron & Metal Gates](https://www.brentwoodelectricgates.co.uk/services/wrought-iron-metal-gates)**: Made-to-measure mild steel gates with powder-coated finish, supplied and fitted to your opening.
- **[Wooden & Timber Electric Gates](https://www.brentwoodelectricgates.co.uk/services/wooden-timber-electric-gates)**: Hardwood or treated timber gates fitted with a correctly rated motor and BS 7671 wiring.
- **[Gate Automation Retrofitting](https://www.brentwoodelectricgates.co.uk/services/gate-automation-retrofitting)**: Existing gate assessed for balance, hinge condition, and motor compatibility before any hardware is ordered.
- **[Bespoke Gate Design & Manufacture](https://www.brentwoodelectricgates.co.uk/services/bespoke-gate-design-manufacture)**: Gates measured, fabricated, and fitted to your exact opening with automation fixing points built in.
- **[Smart Access Control & Intercoms](https://www.brentwoodelectricgates.co.uk/services/smart-access-control-intercoms)**: Video intercom, keypad, or fob access wired and paired to your existing gate motor controller.
- **[Preventative Maintenance & Servicing](https://www.brentwoodelectricgates.co.uk/services/preventative-maintenance-servicing)**: Annual service visit covering motor, photocells, auto-reverse force test, and control board check.
- **[Electric Gate Repair & Emergency Callouts](https://www.brentwoodelectricgates.co.uk/services/electric-gate-repair-emergency-callouts)**: Same-day fault diagnosis covering motor, control board, safety sensor, and manual release.

- **Site Survey Before Specification**: Gate type confirmed on site, not assumed from dimensions.
- **Motor & Control Panel Fitting**: Gate motor and control board installed and commissioned.
- **Safety Sensor Installation**: Photocells and safety edges fitted to DHF standards.
- **BS 7671 Wiring**: 18th Edition armoured supply scoped and wired on site.
- **Post Foundations for Clay Soil**: Foundation depth sized for Brentwood’s clay ground conditions.
- **Opening & Closing Limit Setting**: Travel limits and auto-reverse force set during commissioning.
- **Remote & Keypad Access**: Remote handsets, keypads, or app control paired at handover.
- **Full Safety Test Cycle**: Motor, sensors, and alignment checked before sign-off.

## Where rushed gate installations go wrong, and how to avoid it

The problems that cause gates to fail within a year are almost always set up before the first post goes in.

- **Wrong Gate Type Chosen**: Fitting a swing gate where there is no clear swing arc wastes money and forces a costly swap to sliding or cantilever later.
  **Type Assessed on Site**: Swing, sliding, and cantilever options are assessed during the survey so the right type is confirmed before any hardware is ordered.
- **Shallow Clay Foundations**: Posts set without accounting for Brentwood’s clay soil will shift seasonally, pulling the gate out of alignment within a few years.
  **Clay-Rated Post Depth**: Post foundations are scoped for clay soil conditions from the outset, so the gate stays level and the motor stays correctly aligned.
- **Safety Edges Omitted**: A gate installed without safety edges and photocells is non-compliant with DHF standards and creates a real entrapment risk.
  **DHF Safety as Standard**: Safety edges and photocells are included in every specification to DHF standards, they are never treated as optional extras.
- **Wiring Quoted Late**: Discovering that an armoured supply or consumer unit upgrade is needed after the gate is fitted adds cost and delays the job.
  **18th Edition Wiring Upfront**: Armoured supply and 18th Edition wiring requirements are scoped into the quote before installation begins, not added on the day.

## Why choose Brentwood Electric Gates?

Every enquiry is handled the same way: survey first, specification second, quote third, nothing is assumed before the entrance is seen.

- **Gate Safe Standards on Every Job**: Every installation is specified to Gate Safe standards before any work is booked.
- **DHF Safety Edges Included, Not Extra**: Safety edges and photocells are specified to DHF standards on every job, never sold as optional add-ons after the quote.
- **Groundwork Quoted From the Start**: Post foundations and groundwork are scoped for Brentwood’s clay soil in the initial quote, so the final cost matches the first figure.
- **Wiring Scoped Before Work Begins**: 18th Edition wiring and armoured supply requirements are confirmed during the survey and included in the quote upfront.
- **Surveys That Account for the Area**: We take your enquiry and schedule a survey familiar with Brentwood entrances, from narrow town-centre frontages to long Shenfield driveways.

## Three steps from enquiry to a working gate

1. **Tell Us About Your Entrance**: Share the gate width, slope, power supply, and access needs and we’ll schedule the right survey for the job.
2. **Survey & Full Quote**: The installer surveys the entrance, confirms the gate type, and quotes groundwork, wiring, and automation as one complete figure.
3. **Installation & Handover**: The gate, motor, safety sensors, and access controls are fitted, tested, and handed over with limits and sensors set correctly.

[Request a Survey](https://www.brentwoodelectricgates.co.uk/contact)

## Homeowners, landlords, and commercial owners, each entrance is different

Brentwood properties vary widely, and the right gate specification depends on who needs access and how the entrance is laid out.

- **Homeowners**: Homeowners want a gate that opens every morning without effort and secures the driveway at night without a second thought. We schedule a survey of the entrance, advice on swing or sliding automation, and a quote for the full job: motor, groundwork, wiring, and safety sensors, as one clear figure.
- **Estate Landlords**: Landlords managing multiple properties need access control that tenants can use reliably without calling for help. We arrange installations with keypad, fob, or remote access specified to Gate Safe standards, so each entrance is controlled, compliant, and low-maintenance from day one.
- **Commercial Properties**: Commercial sites off the A12 and around Brentwood need vehicles moving without a bottleneck at the entrance. We schedule a survey to assess the opening width, vehicle weight, and access frequency, then specify a sliding or cantilever system with the motor capacity and safety compliance the site requires.

## What a full electric gate installation actually involves

From assessing the entrance to handing over the remote, each stage has a specific purpose, and skipping any one of them causes problems later.

The installation starts with a site survey, not a catalogue. The survey measures the opening width, checks the slope and ground surface, confirms where the power supply reaches, and assesses whether an existing gate is suitable for automation. Gate weight, hinge condition, and swing path are all checked at this stage. For a new gate, the survey determines whether swing, sliding, or cantilever automation suits the space: a swing gate needs a clear arc, a sliding gate needs run-back room, and a cantilever system suits uneven or sloped ground where a ground track would cause problems.

Once the gate type is confirmed, the groundwork begins. Post foundations are dug and concreted to a depth that accounts for Brentwood’s clay soil, which moves seasonally and can shift shallow posts out of alignment. The gate leaves are hung or the sliding track is set, and the motor and control panel are mounted and wired to BS 7671 using an armoured supply run from the nearest suitable point. Safety edges and photocells are fitted at this stage as part of the standard specification, not added afterwards. The control panel is wired to accept remote handsets, a keypad, or a GSM module depending on what access method was agreed during the survey.

Commissioning is the final stage and the one most often rushed on cheaper jobs. The installer sets the opening and closing travel limits so the gate stops cleanly at each end without straining the motor. The auto-reverse force is adjusted and tested so the gate stops and reverses if it meets resistance, a requirement under BS EN 12453. Photocells and safety edges are tested in sequence, and the full opening and closing cycle is run several times to confirm alignment, motor function, and sensor response. Remote handsets, keypads, or app access are paired and tested before handover, and the customer is shown how to use the manual release in the event of a power cut.

[Request a Survey](https://www.brentwoodelectricgates.co.uk/contact)

## Typical Electric Gate Installation Prices

| Job | Typical cost |
| --- | --- |
| Basic single swing gate installation | £2500-£6000 |
| Double swing gate installation | £4500-£10000 |
| Standard sliding gate installation | £5000-£10000 |
| Bi-fold gate installation | £7500-£15000 |
| Commercial sliding gate installation | £10000-£20000 |

These prices are estimates and often vary with the condition, size and scope of each job. Message us for a free, no-obligation quote.

[See all prices](https://www.brentwoodelectricgates.co.uk/pricing)

## A Brentwood-Focused Gate Brand

Brentwood Electric Gates helps property owners get the right automated gate specified and fitted. Entrances here vary widely, from narrow town-centre frontages to long estate driveways and commercial yards off the A12. We schedule site surveys and quote the full job honestly.

### Our Mission

We exist to take the guesswork out of gate automation for Brentwood property owners, with every entrance surveyed, specified, and fitted to DHF and Gate Safe standards.

- **Specification**: Gate type, safety devices, and groundwork are scoped before any installer is arranged.
- **Transparency**: Groundwork, wiring, and post foundations are included in the quote from the start.
- **Compliance**: Safety edges and photocells are specified to DHF and Gate Safe standards on every job.
- **Suitability**: Swing, sliding, or cantilever is chosen after a site survey, not assumed in advance.

## Electric Gate Installation in Brentwood

We schedule surveys across a wide area so every job gets the right attention close to home.

- **[Brentwood](https://www.brentwoodelectricgates.co.uk/)**: Surveys at homes in Warley, Great Warley & Pilgrims Hatch.
- **[Shenfield](https://www.brentwoodelectricgates.co.uk/areas/shenfield-essex)**: Survey & quote for Hutton Mount, Old Shenfield Village & Shenfield Park homes.
- **[Hutton](https://www.brentwoodelectricgates.co.uk/areas/hutton-essex)**: Surveys for Hutton Poplars, Hutton Mount & Long Ridings homes.
- **[Ingatestone](https://www.brentwoodelectricgates.co.uk/areas/ingatestone-essex)**: Surveys for homes near Ingatestone High Street, Station Lane & Roman Road.
- **[Billericay](https://www.brentwoodelectricgates.co.uk/areas/billericay-essex)**: Surveys for homes near Norsey Road, Western Road & Little Burstead.
- **[Mountnessing](https://www.brentwoodelectricgates.co.uk/areas/mountnessing-essex)**: Surveys for homes on Roman Road, Thoby Lane & Lower Road
- **[Stock](https://www.brentwoodelectricgates.co.uk/areas/stock-essex)**: Surveys for homes by High Street, Back Lane & Mill Road
- **[Doddinghurst](https://www.brentwoodelectricgates.co.uk/areas/doddinghurst-essex)**: Surveys for homes on Dagwood Lane, Outings Lane & Church Lane.
- **[West Horndon](https://www.brentwoodelectricgates.co.uk/areas/west-horndon-essex)**: Survey visits for Station Road flats, Thorndon Avenue homes & village bungalows.

### Not Sure if We Cover Your Area?

Tell us your postcode and we’ll confirm whether a survey and quote can be arranged for your area.

[Request a Survey](https://www.brentwoodelectricgates.co.uk/contact)

## Questions about electric gate installation in Brentwood

### Can my existing gate be made automatic, or do I need a new one?

Many existing gates can be automated without replacement, provided the structure is sound and the geometry suits a motor. A surveyor checks hinge condition, gate weight, and post strength before recommending retrofitting. If the gate is warped, rotten, or undersized for a drive mechanism, a new gate is the more practical route. See [gate automation retrofitting](https://www.brentwoodelectricgates.co.uk/services/gate-automation-retrofitting) for more detail.

### How do I know if an electric gate will suit my entrance size and layout?

A site survey measures the opening width, available swing or slide clearance, ground level, and power proximity. Swing gates need clear arc space; sliding gates need a run of wall or fence alongside the opening. Most domestic entrances suit one configuration or the other, and the survey identifies which before any work is agreed.

### What happens during an electric gate installation?

The installer sets posts or checks existing ones, lays ducting for cabling, mounts the motor and gate leaves, then connects the control board and access devices. Safety edges and photocells are fitted and aligned to DHF standards. The system is then tested through a full cycle before handover, and you are shown how to operate and override it.

### Will the installation disrupt access to my property?

Access is restricted while the gate leaves and motors are being fitted, typically for most of the installation day. The work is planned to minimise the closed period, with a start time agreed that suits your routine. A temporary manual override is left in place if the job runs across more than one day.

### What is included in the installation and set-up?

Installation covers supply and fitting of the gate, motor, control board, safety photocells, and safety edges, all specified to DHF standards. It also includes ducting, connection to the power supply, and commissioning. Remote controls or keypads are programmed, and you receive a walkthrough of daily operation and the manual release.

### How much does electric gate installation cost?

Guide prices run from £2,500-£6,000 (Basic single swing gate installation) to £10,000-£20,000 (Commercial sliding gate installation). A site survey gives you a fixed quote before any commitment.

### What can make the final price go up?

The main cost drivers are gate size and material, the need for new posts or concrete foundations, distance from the nearest power supply, and the access control system chosen. Sloping or uneven ground, hard substrates, or a bespoke gate design also add to the total. A survey identifies these factors upfront so there are no surprises.

### Can my existing gate be automated, or would I need a new one?

Many existing gates can be automated, but the deciding factors are structural condition, weight, and hinge or track alignment. A gate that sags, has weak posts, or is warped will need repair or replacement before a motor can be fitted safely to Gate Safe standards. If your gate is sound, retrofitting automation is often straightforward. Gate automation retrofitting covers what that process involves.

## Tell Us About Your Entrance

Describe the gate width, slope, and power supply and we’ll schedule a survey and quote the full job: groundwork, wiring, and safety sensors included.

[Request a Survey](https://www.brentwoodelectricgates.co.uk/contact)

## Business details

### Contact

- **Email**: [contact@brentwoodelectricgates.co.uk](mailto:contact@brentwoodelectricgates.co.uk)
- **Based in**: Brentwood, Essex, CM14
- **Enquiries**: [Send an enquiry](https://www.brentwoodelectricgates.co.uk/contact) — We ask for your name, phone number, email and a message.

### Opening hours

- **Monday**: 08:00 – 18:00
- **Tuesday**: 08:00 – 18:00
- **Wednesday**: 08:00 – 18:00
- **Thursday**: 08:00 – 18:00
- **Friday**: 08:00 – 18:00
- **Saturday**: 10:00 – 16:00
- **Sunday**: 10:00 – 16:00
